First, the definition of conveyor belt
The large angel conveyor belt is also called a skirt partition belt, which is composed of a base belt, a rib and a diaphragm. The ribs prevent the material from slipping and falling. In order to facilitate the winding around the drum, the flange is designed to be corrugated; the function of the diaphragm is to support the material, and in order to achieve large inclination, the T-type TC is used. The flange and the diaphragm are connected to the base tape by secondary vulcanization and have a high joint strength. It is used to transport powdery, granular, small, paste and liquid materials that are easy to scatter.
Second, the large angel conveyor belt needs to consider when purchasing
1. During the operation of the sidewall conveyor belt, the base belt mainly receives the pulling force, which plays an important role in the application effect. If the rigidity is small, the conveyor belt will be laterally deformed, resulting in a scene such as spreading and easy to wear the skirt during the return stroke. Edges and separators usually require a minimum of 5-6 layers of core layer.
2. The large angel conveyor can work in an environment with an inclination of 0° to 90°. Arriving at the point of view of the transportation that cannot be reached further reduces the cost of the project, shortens the transportation interval, and saves manpower and material resources. The cover angle of the large angle rib conveyor should exceed the 80 degree angle. (The advantage of the cover tape is to avoid damage to the base belt caused by the leakage; together, the material can be added).
3, look at the partitions and skirts, according to the transport volume of the conveyor to choose, determine the height of the skirt, the spacing of the partitions, the size of the useful bandwidth and other elements.
4. Baseband: The baseband of the corrugated sidewall conveyor belt mainly receives the tensile force, but its lateral rigidity also plays a significant role in the application performance and effect during the operation. If the rigidity of the conveyor belt is too small, the conveyor belt will be laterally deformed, resulting in a scene such as spreading. Add horizontal rigid layer and add lateral rigidity of base belt (such as CC-56 cotton canvas core conveyor belt, tearing strength 56N/mm, minimum number of core layers more than 6 layers - 6 layers, upper cover rubber thickness = 4.5mm Above, the thickness of the lower cover rubber = 1.5mm or more).
5. The large angel conveyor is much higher than the flat belt request for the drum request. If it is in the same type of belt, it is larger than the flat belt type.