What measures can extend the service life of the rubber conveyor belt during use?
The life of the rubber conveyor belt in use is quite different from the theoretical service life, mainly due to improper operation in use and inadequate daily maintenance. The low service life of the rubber conveyor belt will increase the production cost of the enterprise and cause waste of resources.
First, check whether there is any foreign matter splash, improve the use of the environment
The rubber conveyor belt has high requirements on the transmission system. The same plane and coaxiality of the components of the same transmission plane directly affect the service life of the transmission belt. Due to long-term running wear, the coaxiality of the same plane or the same plane will be affected. Moreover, during the entire operation, only the conveyor belt is a rubber member, and any abnormal parts and interference parts caused by the conveyor belt may seriously damage the conveyor belt.
Rubber conveyor belts are used in harsh environments, making it easy to splash belts or timing belts and foreign objects. When the foreign object is running at a high speed, just like a knife on a non-stop cutting belt, it will quickly cause damage to the belt. Therefore, it is not regularly checked during use to see if any foreign matter has entered.
Second, reduce grease
Grease will accelerate the aging process of rubber. Therefore, Wanfeng conveyor belt manufacturer reminds you: If there is grease on the hand when installing or disassembling the rubber conveyor belt, please wipe it clean before operation, and do not put the conveyor belt in the oil. If the rubber belt accidentally gets oily, use it carefully and replace it as soon as possible.
Third, the installation tension
The cord is also an important part of the conveyor belt. If the bending radius is too small, the belt conveyor belt tension will be attenuated. Therefore, the amount of tension applied will directly affect the use of the belt. If the tension is too small during use, the belt will slip. The slip will not only aggravate the wear on both sides of the belt, but also generate heat during the slip to accelerate the aging speed of the rubber conveyor belt.