Home > News > Content

What Is Acid And Alkali Resistant Conveyor Belt? What Is Its Characteristic?

Jun 20, 2019

Definition of acid and alkali conveyor belt:

Acid-base conveyor belt (acid and alkali-resistant conveyor belt) is suitable for working environment in contact with acid and alkali, such as phosphate fertilizer manufacturing, sea salt and salt. The acid-resistant and alkali-resistant conveyor belt (acid-resistant and alkali-resistant conveyor belt) is made of rubber-plastic blended and filled with temperament materials with excellent alkalinity, and has better acid-base resistance than the neoprene-resistant acid-base conveyor belt. The skeleton material is made of polyester canvas, which is more reliable than the cotton canvas core with acid and alkali resistance, and is generally made into a ring shape.


Characteristics of acid and alkali resistant conveyor belts:

The acid and alkali resistant conveyor belt is made of cotton canvas, nylon canvas or polyester canvas as the core, the belt body has good elasticity, the groove forming performance is good, and the elongation is small. The cover rubber made of acid and alkali resistant materials has good chemical resistance and good physical properties.


Acid and alkali conveyor belt deviation reason 1:

For example, when the acid-base conveyor belt is deviated because the axis of the head drive roller or the tail reversing drum is not perpendicular to the center line of the conveyor, the adjustment method is as follows: for the head roller, such as the conveyor belt, to the right side of the drum If the bias is right, the bearing block on the right side should move forward, and the conveyor belt should be moved to the left side of the drum. The left bearing housing should move forward, and the corresponding left bearing housing can be moved backward or the right bearing. The seat moves backwards.


Acid and alkali conveyor belt deviation reason 2:

If the acid-base conveyor belt deviation occurs because the blanking position at the transfer point is not correct, we usually recommend adjusting the relative height of the upper and lower belt conveyors at the transfer point.