Home > News > Content

What Are The Requirements For The Structure And Setting Of The Roller Bracket?

Sep 05, 2019

What are the requirements for the structure and setting of the roller bracket?

1 The feet on both sides of the foot are inverted T-shaped, the height of the pillar is 350mm, and the length of the foot is 250mm.

2 The two foot pillars are connected by a cross arm of a length of 400 mm which is welded at the bottom.

3 Two foot pillars are separated from the bottom by 175mm, one round hole with a diameter of 16mm, one horizontally mounted Φ14 round steel shaft, and the two ends are 40mm in length, and fastened with M14 nut.