Before the endless conveyor belt, we said that there is relatively little knowledge.
First of all, let's talk about the joint method of the endless conveyor belt.
Directly vulcanized into an endless belt;
Retaining the head during vulcanization, and partially vulcanizing the joint according to the requirements of on-site heating and pressurization;
Adhesive bonding on site. Because it has no mechanical joints, it runs smoothly and is suitable for material transportation in the departments of mineral processing and fertilizer.
Notes on the use of the endless conveyor belt
Prevent the conveyor load from starting.
If the conveyor belt runs off, corrective measures should be taken in time.
Avoid the roller covered by the material, causing the rotation to be ineffective, prevent the leakage from getting stuck between the roller and the tape, pay attention to the lubrication of the movable part of the conveyor belt, but not the oil conveyor belt.
When the conveyor belt is partially damaged, the artificial cotton should be repaired in time to avoid expansion.
Avoid belts that are blocked by racks, struts or block materials to prevent breakage.