The daily maintenance of the conveyor belt is to ensure the working efficiency and service life of the conveyor belt. Therefore, the conveyor belt should be regularly maintained and maintained during use.
1. Adjust the relevant equipment in time according to the operation of the conveyor belt. Preventing the deviation of the conveyor belt will increase the wear of the belt edge and damage the upper and lower covering rubber. Causes the wire rope to be exposed and detached.
2. Clear the attachment on the surface of the drive roller in time to prevent the bubbling of the joint due to the irregular shape of the surface of the drum, the twitching of the wire rope, the elongation of the vulcanized joint, etc., which affect the strength of the joint.
3. The vulcanized joint is the weak part of the strength of the conveyor belt. The joint opening is initially characterized by cracking of the rubber. The water is immersed in the steel wire rope through the gap of the core rubber, causing the steel wire rope to rust, break the wire, and twitch. The amount of elongation change of the joint, abnormal surface changes, etc. should be checked regularly, and preventive inspection work should be done to repair the defective joints in time.
4. If the conveyor belt edge glue occurs, the cover rubber falls off, and the wire rope and other defects are partially exposed, and the cold glue or vulcanization heat compensation should be carried out in time. According to the local defect of the conveyor belt, different repair methods such as cold compensation, hot vulcanization, and filling of the steel wire rope are selected to keep the surface of the conveyor belt intact.
We must control the total length of the glued belt after installing or repairing the replacement belt. The construction process of the conveyor belt must be strictly managed, and the construction details should be grasped to ensure the joint quality. During the installation or maintenance process, the construction process must be strictly implemented, and the materials should not be cut and cut, and the time should not be shortened. It is also necessary to strengthen the daily maintenance management of the conveyor belt to ensure its use effect and prolong its service life.