Home > News > Content

Endless Conveyor Belt Installation Precautions

May 03, 2019

Note 1:

Wear a flexible shaft on the endless belt take-up core, and put the belt roll up. Pay attention to the direction of the upper and lower covers before the rack is placed.

Note 2:

In the workplace that is not suitable for loading, the endless conveyor belt can be guided open, and the folding conveyor belt has a sufficiently large radius of curvature to prevent damage to the conveyor belt, and the folding place prohibits the placement of heavy objects on the conveyor belt.

Note 3:

If the endless conveyor belt is replaced, the new belt can be attached to the old belt, and the unloading belt is carried out simultaneously with the installation of the new conveyor belt automation equipment.

Note 4:

For horizontally running conveyors, the old conveyor can be cut off at any point, and the conveyor running in the oblique direction needs to select the cutting point to prevent the control from falling due to the self-weight.

Note 5:

After the position of the new endless conveyor belt is placed on the conveyor, the end of the tape is fixed by a clamp, and then connected to the rope that bypasses the roller and the pulley, and the conveyor belt is balancedly conveyed to the conveyor by the traction device. To prevent the conveyor belt from collapsing with the frame.

Note 6:

One end of the conveyor belt is fixed to the transport frame by a clamp, and the other end is tensioned by a pulley until the conveyor belt does not sag significantly on the return idler.

Note 7:

Fix the tensioning device from the starting point of 100~150mm.