Home > News > Content

Chevron Conveyor Belt Features And Maintenance Precautions

Jun 15, 2019

The pattern conveyor belt is composed of a belt body and a pattern portion. Due to the difference in the size of the conveyed material and the conveyor, the shape and height (depth) of the pattern are required to be different.

Pattern conveyor belt features:

Pattern conveyor belt core material: ordinary cotton canvas (CC), polyester-cotton mixed-woven canvas (CP), nylon (NN), polyester (EP), etc.

Pattern conveyor belt bandwidth: 300 ~ 800mm

Pattern conveyor belt pattern height: 5,10,15,20mm Note: The shape of the pattern can be designed according to user requirements.

Pattern conveyor belt features: suitable for the conveyance of materials with a dip angle of 0 ~ 40 °, to prevent material from falling.

The maintenance of the pattern conveyor belt requires attention to the following items:

In the transportation and storage, the pattern conveyor belt should be kept clean and protected from direct sunlight or rain and snow to prevent contact with acids, alkalis, oils, organic solvents and other materials, and one meter away from the heating device.

Conveyor belts of different types and sizes are not suitable for use together, and the joints are preferably glued.

The type, structure, specification and number of layers of the conveyor belt should be selected according to the conditions of use.

The running speed of the conveyor belt is generally not more than 2.5 m / s. The block size is large, the abrasive material and the fixed discharge device should be used at low speed.

When the pattern conveyor belt is stored, the storage temperature should be kept between 18-40 °C, and the relative humidity should be kept between 50-80%.

During the storage of the pattern conveyor belt, the conveyor belt shall be placed in a roll and shall not be folded. It shall be turned once every season during the placement.

The relationship between the diameter of the conveyor drum of the conveyor and the belt layer of the conveyor belt, the matching of the transmission drum, the reversing drum and the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor.

The feeding direction should be in the running direction of the conveyor belt. In order to reduce the impact on the conveyor belt when the material falls, the chute should be adopted to reduce the falling distance of the material; the receiving section of the conveyor belt should shorten the spacing of the idler and use the cushioning roller as the leakage material. The belt is compliant with a soft and moderate baffle plate to prevent the baffle plate from being too hard and scraping the belt surface of the conveyor belt.