Home > Information > Content

What should I do when the conveyor belt is running?

Aug 05, 2019

What should I do when the conveyor belt is running?


   1. The belt conveyor belt will not cause longitudinal tearing during normal operation. Only when the belt is severely deflected or externally sharp objects, such as steel plates, iron blocks, I-beams, bolts, large pieces of meteorites, etc. Only when a belt is scratched may be formed, and when it is severe, it will tear. The belt is deflected to form a belt tear which usually only tears the belt edge and does not appear on the inside of the belt. It is easy to prevent the deviation of the belt from being reversed. When the device is pressed according to the request device, it will not appear severe belt tearing.


      2. Therefore, this article focuses on the analysis of a belt scratch or a longitudinal tearing event due to the sharp object being poked into the belt. To prevent longitudinal scratching or tearing of the belt conveyor, it is necessary to clarify the source of the belt to scratch or tear foreign matter, and then take useful measures to prevent foreign matter from entering the belt, improve the protection device, and enhance the responsibility of the belt conveyor driver and the patrol personnel. . That is, it is necessary to adopt an inductive precaution to maximize the prevention of the occurrence of longitudinal scratches or tears in the belt conveyor.