Home > Information > Content

What are the measures to avoid damage to the rubber surface during use of nylon conveyor belts?

Sep 11, 2019

If the nylon conveyor belt is used improperly, it will cause damage to the rubber surface. If the damage is not serious, the following repairs can be made. If the damage is serious, the nylon conveyor belt must be replaced. No matter which case, it will take time and effort. Therefore, in the use, try to avoid the situation of rubber surface damage.

     1. It is necessary to prevent the conveyor belt from being subjected to a large impact. The design of the leakage system of the transportation system is too large, the coal flow direction is unreasonable, and the system has many large materials, which can cause the conveyor belt to be impacted, forming more pits on the belt surface and damaging the rubber surface.

     2. Prevent contact with high temperature materials. When the nylon conveyor belt transports the dirty slag coal in the boiler room, the unheated high temperature dirty slag coal causes the conveyor belt to cover the glue to melt, which aggravates the abnormal wear of the belt surface. In addition, sparks and slag generated during electric welding and gas cutting operations can also cause damage to the cover tape.

     3. The quality of the conveyor belt. In the manufacturing process of nylon conveyor belt, due to insufficient adhesive force of the rubber compound, defects in the process or a certain manufacturing process, the reaction force of the frictional force causes the cover rubber to gradually peel off, and in severe cases, the tear of the cover rubber is generated.

     In short, to prevent damage to the rubber surface of the nylon conveyor belt, special attention must be paid from production to use. For quality, we must pay attention to the purchase, to the formal manufacturers, can reduce this situation. During the use process, pay attention to the details of the processing, the standard operation will also reduce this situation.