Home > Information > Content

Usage of large angel conveyor belt

Apr 25, 2019

The large angel conveyor belt is the most famous for the large-angle wave-shaped rib conveyor belt. The large-angle wavy rib conveyor belt is also called the skirt partition belt. It is composed of three parts: base belt, rib and diaphragm. The ribs prevent the material from slipping and falling. In order to facilitate the winding around the drum, the flange is designed to be corrugated; the function of the diaphragm is to support the material, and in order to achieve large inclination, the T-type TC is used. The flange and the diaphragm are connected to the base tape by secondary vulcanization and have a high joint strength. It is used to transport powdery, granular, small, paste and liquid materials that are easy to scatter.


The following points should be noted when using the corrugated sidewall conveyor:

The tension of the A rib conveyor belt should not be too large and should be used under the maximum tension.

B. In the use of the rib conveyor belt, the phenomenon of slipping or pulling does not occur. The fault should be eliminated in time to adjust the tensioning system to keep the elastic device flexible.

The direction of the C transport material and the speed at which the material falls are consistent with the direction and speed of the belt.

D empty machine to prevent the motor overload and large angle conveyor belt slip, before the shutdown, the material is completely discharged.

E is using a rib conveyor to prevent folding and hard object pressure. Should be used and stored in a curl.

Do not let the belt run off or snake running during F transport, and adjust it in time.