Home > Information > Content

Rubber conveyor belt use maintenance point

Jun 08, 2019

What are the points of attention for the use of rubber conveyor belts? Today, ZT BELTING conveyor belt manufacturers to take everyone to understand

   1. Avoid the roller that is covered by the material, causing the rotation to be ineffective, prevent the leakage between the card and the roller and the tape, pay attention to the lubrication of the active part, but not the oily rubber conveyor belt.

   2, the drum to avoid loading with load

   3. When the tape is out of deviation, corrective measures should be taken in time;

   4. It is found that the local damage of the tape should be repaired in time to avoid expansion;

   5, to avoid the tape is blocked by the rack, pillar or block material, to prevent the use of the tearing conveyor belt Note: With the rubber conveyor belt in the industrial production, multi-variety, high performance, lightweight, multi-functional Long life is a concern for manufacturers.

   6. The type, structure and number of layers of the conveyor belt should be selected according to the conditions of use.

   7. The running speed of the conveyor belt should not exceed 2.5 m/s. The material with large block and large wear should use the fixed force type unloading device, and the low speed should be used as much as possible.

   8. The relationship between the diameter of the transmission drum of the conveyor and the belt layer of the conveyor belt, the matching of the transmission drum and the reversing drum, and the requirements for the bracket angle should be reasonably selected according to the design regulations of the conveyor.