Home > Information > Content

Introduction of different pattern belts

Mar 26, 2019

The pattern rubber belt is a dip belt composed of a cover rubber with a working surface and a cover rubber with a non-working surface and a core.

Pattern conveyor belt•Features: It is suitable for conveying materials with inclination angle of 0~40° to prevent material from falling.

• Pattern form: herringbone type, pit type, U type, strip pattern, grain pattern, fan pattern

• Bandwidth: 300~800mm

• Pattern height: 5, 10, 15, 20mm Note: The shape of the pattern can be designed according to user requirements.

The commonly used pattern conveyor belt is explained as follows:

Herringbone pattern

Features: There are “human” pattern on the belt surface, and the pattern can be closed or closed. Each pattern can be divided into high, medium and low.

Uses: It is suitable for conveying powdery, granular and small materials with an inclination of ≤40 degrees, and can also transport bagged materials.

Strip pattern

Features: There are strips on the belt surface that are higher than the strips. The patterns are divided into high, medium and low. Each pattern can be divided into sparse and dense forms according to the arrangement pitch.

Uses: Suitable for horizontal conveying packaging of ≤ 30 degree inclination. If it is in the case of a groove, it can replace the chevron pattern.

Grain pattern

Features: There are granular patterns on the belt surface which are higher than the belt body or the concave embedded belt body, and the dimples can also be made into a square hole shape or a prism shape and a cloth pattern shape.

Uses: The convex grain pattern is suitable for flexible packaging or material handling (such as cardboard boxes) that requires gripping or no sliding conveyance.

The pit-shaped grain pattern is suitable for the transport of granules with an inclination of ≤ 45 degrees.

Sector pattern

Features: Half-fan (or 1/4 round) pattern on the belt surface. When the tape is grooved, the pattern is disturbed into a fan shape (or semi-circular shape) and a high pattern.

Uses: Suitable for conveying powder, granules and block materials with a large inclination of ≤60 degrees.

Lawn pattern, fishbone pattern, diamond pattern, cross pattern, mesh pattern, inverted triangle pattern, horseshoe pattern, zigzag pattern, small polka dot pattern, diamond pattern, snakeskin pattern, cloth pattern, large round table pattern, wave pattern, seesaw Patterns, one-line patterns, thin straight lines, golf patterns, large square patterns, matt patterns, coarse patterns, checkered patterns, etc. are suitable for different performance requirements of different working environments in the industrial field.