The longitudinal joints of the conveyor belt are mainly exposed on a wider or especially narrow conveyor belt, and at the moment of the glue joint, it is easier to reveal the situation in which the longitudinal joints are stacked. Different bonding processes are affected by the influence of the longitudinal joints. If the conveyor belt is considered to be suitable and the process used is not overlapped, then the longitudinal joint will not basically have a bad influence on the joint initiation. If it is to be lapped, then the joint will be exposed to the thickness of the situation. problem.
When opening the knife, pay attention to the layer by layer to distinguish clearly. In the single layer, the stripped ones must be stripped off. You can't leave it. If you don't strip it, you don't consciously actively.