Home > Information > Content

How daily maintenance of the conveyor belt?

May 10, 2019

Conveyor belts play a very important role in our production. Therefore, the normal operation of the conveyor belt is crucial for the production of the enterprise. We should not only pay attention to the correct use of the conveyor belt in daily production, but we should also carry out normal daily maintenance. To make the conveyor belt better for our production, let's summarize some of the maintenance contents of the conveyor belt in daily production:

1. Adjust the relevant equipment in time according to the operation of the conveyor belt. Preventing the deviation of the conveyor belt will increase the wear of the belt edge and damage the upper and lower covering rubber. Causes the wire rope to be exposed and detached.

2. Clear the attachment on the surface of the drive roller in time to prevent the bubbling caused by the uneven force of the joint due to the irregular shape of the drum surface, the twitching of the steel wire rope, the elongation of the vulcanized joint, etc., which affect the strength of the joint.

3. The vulcanized joint is the weak part of the strength of the conveyor belt. The joint opening is initially characterized by cracking of the rubber. The water is immersed in the steel wire rope through the gap of the core rubber, causing the steel wire rope to rust, break the wire, and twitch. The amount of elongation change of the joint, abnormal surface changes, etc. should be checked regularly, and preventive inspection work should be done to repair the defective joints in time.

4. If the adhesive tape on the conveyor belt occurs, the cover rubber will fall off, and the defects such as the steel wire rope will be partially exposed. The cold glue or vulcanization heat should be timely applied. According to the local defect of the conveyor belt, different repair methods such as cold compensation, hot vulcanization, and filling of the steel wire rope are selected to keep the surface of the conveyor belt intact.

We must control the total length of the glued belt after installing or repairing the replacement belt. The construction process of the conveyor belt must be strictly managed, and the construction details should be grasped to ensure the joint quality. During the installation or maintenance process, the construction process must be strictly implemented, and the materials should not be cut and cut, and the time should not be shortened. It is also necessary to strengthen the daily maintenance management of the conveyor belt to ensure its use effect and prolong its service life.